(Hong Kong)
Product Summary
The AM29F160DB-90EC is a 16Mbit, 5.0 Volt-only Flash memory device organized as 2,097,152 bytes or 1,048,576 words. Data appears on DQ0-DQ7 or DQ0-DQ15 depending on the data width selected. The AM29F160DB-90EC is designed to be programmed in-system with the standard system 5.0 volt VCC supply. A 12.0 volt VPP is not required for program or erases operations. The AM29F160DB-90EC can also be programmed in standard EPROM programmers. The device offers access times of 70 and 90 ns, allowing high speed microprocessors to operate without wait states. The device is offered in a 48-pin TSOP package. To eliminate bus contention each device has separate chip enable (CE#), write enable (WE#) and output enable (OE#) controls.
Parametrics
AM29F160DB-90EC absolute maximum ratings: (1)Storage Temperature Plastic Packages: –65℃ to +150℃; (2)Ambient Temperature with Power Applied:–55℃ to +125℃; (3)Voltage with Respect to Ground VCC (Note 1):–2.0V to +7.0V; (4)A9, OE#, and RESET# (Note 2): –2.0V to +12.5V; (5)All other pins (Note 1):–0.5V to +7.0V; (6)Output Short Circuit Current (Note 3): 200mA.
Features
AM29F160DB-90EC features: (1)5.0 Volt single power supply operation; (2)High performance: Access times as fast as 70ns; (3)Manufactured on 0.25μm process technology; (4)CFI (Common Flash Interface) compliant; (5)Ultra low power consumption (typical values at 5 MHz); (6)Flexible sector architecture; (7)Top boot or bottom boot configurations available; (8)Minimum 1,000,000 write cycle guarantee per sector; (9)20-year data retention at 125℃; (10)Package options 48-pin TSOP; (11) Compatible with JEDEC standards; (12) Embedded Algorithms; (13) Erase Suspend/Erase Resume; (14) Data# Polling and toggle bits; (15) Unlock Bypass Program command; (16) Ready/Busy# pin (RY/BY#); (17) Hardware reset pin (RESET#); (18) WP# input pin; (19) Program and Erase Performance.
Diagrams
